- 您现在的位置：买卖IC网 > Sheet目录321 > DRR-40A (Delta Industrial Power)MODULE REDUNDANCY 40A DIN RAIL
CliQ II Redundancy Module 20A 40A
Redundancy Module
1.) INPUT DATA
Nominal input voltage
Voltage range
DRR- 20A
24-48VDC
22-60VDC
DRR- 40A
Nominal current
Input voltage alarm / relay contacts
20A max
24V system:
both Vin1 & Vin2 >18V +/- 5% or
<30V max. relay contacts
40A max
48V system:
both Vin1 & Vin2 >36V +/- 5% or
<60V max. relay contacts
Note: The LED will turn on when The Vin1 & Vin2 > 18V +/- 5% (For 24V system) or > 36V +/- 5% (For 48V system) and not
more than 30V (For 24V system) or not more than 60V (For 48V system), The relay contacts will be closed. If Vin1 & Vin2 is under
or over this range, The LED will be turn off.
2.) OUTPUT DATA
Nominal output voltage U N / tolerance
Nominal current
Derating above +50 °C
Vin-0.65V (Typ)
20A max / 40A max
> 50°C (2.5% / K.)
Short circuit / Over Load Limit
(<25A for DRR- 20A)
(<50A for DRR- 40A)
Note: The overload condition must be controlled by The PSUs in parallel; The limit of input current would not more than 25A (For
20A module) or not more than 50A (For 60A module).
Efficiency
3.) CERTIFICATION / STANDARDS
Electrical equipment of machines
Electrical safety (information technology equipment)
Industrial Control Equipment
Electronic equipment for use in electrical power
installations
Safety entry low voltage
RoHS Compliant
Protection against electric shock
4.) GENERAL DATA
Isolation voltage:
Input / PE type
test/routine test:
output / PE type
test/routine test:
Degree of protection
Class of protection
MTBF
Type of housing
Dimensions (W / H / D) + mounting rail
> 97% typical.
IEC60204-1 (over voltage category III)
UR/cUR recognized to UL60950-1, SIQ BG to EN60950-1, CB test certificate and report
to IEC60950-1 and CE.
UL/cUL recognize to UL508
EN50178 / IEC62103
PELV (EN60204), SELV (EN60950)
Yes, RoHS directive, WEEE directive
DIN 57100-410
1.5 KVAC / 1.5 KVAC
1.5 KVAC / 1.5 KVAC
IP20
Class II with PE connection
> 800,000hrs. as per BELL CORE STD or IEC61709
Aluminium (AL1100F)
121 mm X 50 mm X 122.1 mm (L X W X H)
Weight
LED (DC INPUT OK)
5.) CLIMATIC DATA
Ambient temperature (Operating)
Ambient temperature (Storage)
Humidity at+25 °C, no condensation
0.375Kg
Vin1 OK and Vin2 OK (GREEN LED)
- 40°C to 80°C (> 50°C derating)
- 40°C to 85°C
< 95% RH
0.515Kg
10Hz to 500Hz @ 30 m/S2 (3G peak); displacement of 0.35mm; 60min per axis for all
Vibration (Non-Operating)
Shock (in all directions)
Pollution degree
Climatic class
Conformance with EMC guideline
X, Y, Z direction. Refer to IEC 60068-2-6. Note: all figures quoted are amplitudes (peak
values)
IEC60068-2-27, 30G (300m/s2) for duration 18ms 1 Shock in 2 Directions tested with
Fixture with EUT mounted on DINRAIL in Vertical and Horizontal position.
2 according to EN50178
3K3 according to EN 60721
2004/108/EC and for low voltage guideline
2006/95/EC :
DRR-20A (EOE21010284)
DRR-40A(EOE21010285)
EMC (electromagnetic compatibility)
Immunity to interference :
According to EN 61000-6-2
CE (EMC and Low Voltage directive)
?
EN 61000-4-2 1)
Discharge of static electricity (ESD)
Housing:
Contact discharge:
Air Discharge:
LEVEL 4
8 KV
15 KV
?
?
EN 61000-4-3 1)
Radiate Field Immunity Housing:
Frequency/Field intensity:
EN 61000-4-8 2)
Power frequency magnetic fields Input:
Current:
LEVEL 3
80MHz - 1GHz / 10V/M with 1kHz tone / 80% modulation
Level 3
10A/meter
EN55011 corresponds to CISPR11 / EN55022 corresponds to CISPR22 / EM 61000 corresponds to IEC 1000
1) Criterion A: Normal operating behavior within the defined limits.
2) Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
3) Symmetrical: Conductor to conductor.
4) Asymmetrical: Conductor to ground.
5) Class B: Area of application industry and residential.
www.deltaPSU.com
6
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
DRS-1215
SURGE SUPPRSSR 15A 14OUT RACKMNT
DRS232
SURGE SUPPR NETWORK RJ45/11
DS1200
IC SRAM 1KBIT 4MHZ 10DIP
DS1220AB-100IND+
IC NVSRAM 16KBIT 100NS 24DIP
DS1220Y-100IND+
IC NVSRAM 16KBIT 100NS 24DIP
DS1225AB-70+
IC NVSRAM 64KBIT 70NS 28DIP
DS1225Y-200+
IC NVSRAM 64KBIT 200NS 28DIP
DS1230WP-150+
IC NVSRAM 256KBIT 150NS 34PCM
相关代理商/技术参数
DRR4110
制造商:Knitter-Switch 功能描述:Tube
DRR4116
制造商:knitter-switch 功能描述:Bulk
DRR-80-014
制造商:TDK-Lambda Corporation 功能描述:- Bulk
DR-RDN20
功能描述:DIN导轨式电源 21-28Vin 30Vout 20A Redundancy Module RoHS:否 制造商:Mean Well 产品:Linear Supplies 商用/医用:Commercial 输出功率额定值:960 W 输入电压:180 VAC to 264 VAC, 254 VDC to 370 VDC 输出端数量:1 输出电压（通道 1）:48 V 输出电流（通道 1）: 输出电压（通道 2）: 输出电流（通道 2）: 输出电压（通道 3）: 输出电流（通道 3）: 尺寸:150 mm L x 110 mm W
DR-RDN20_10
制造商:MEANWELL 制造商全称:Mean Well Enterprises Co., Ltd. 功能描述:20A Power Supply Redundancy Module
DR-RDN20_11
制造商:MEANWELL 制造商全称:Mean Well Enterprises Co., Ltd. 功能描述:20A Power Supply Redundancy Module
DRR-DTH
制造商:Hamlin Electronics 功能描述:Reed Switch 制造商:Hamlin Electronics 功能描述:REED SWITCH CO 500VDC 3A 30W 制造商:Hamlin Electronics 功能描述:REED SWITCH, CO, 500VDC, 3A, 30W 制造商:Hamlin Electronics 功能描述:REED SWITCH, CO, 500VDC, 3A, 30W; Contact Configuration:SPDT-CO; Switching Voltage Max:500VDC; Switching Power Max:30W; Contact Current Max:3A; Contact Resistance Max:125mohm; Switch Case:Glass; Operation Ampere Turns Range:50AT to ;RoHS Compliant: Yes 制造商:Hamlin Electronics 功能描述:Change Over Switch
DRR-DTH 45-50
功能描述:SWITCH REED SPDT .5A 45-50 A/T RoHS:是 类别:开关 >> 磁簧 系列:DRR-DTH 标准包装:1 系列:- 类型:模制壳体 电路:SPST-NO 必须的操作范围:- 必须的释放范围:- 最大开关电流 (DC):1A 最大开关电压 (DC):200V 最大开关功率:15W 磁体:包括在内 安装类型:底座安装 端接类型:- 包装:散装